Defibrillator wires have 3 main forms:Coil & Round;Straight & Round and Flat Ribbon.The most used is Coil cord for AED paddle,and Flat Ribbon cable for AED Pad. 

The Defibrillator cable usually contains 3 to 10 depends on its purpose and applications. A simple 3 wire defibrillator (it could be a  aed training machine) only need 3 wires for the paddle. And ECG Defibrillator will use 4-8 signal wire to get ECG signal,indicates the operator if it is necessary to make difibrillation and when to make it. The more Intelligent a  ECG Monitor with defibrillator is,the more wires it need.ECG Defibrillator monitor the heart and indicates the operator when is the best time to defibrilate and how many joules power is needed.It make defibrillation easier and more accurate.

As a China Medical cable manufacturer ,we custom AED cable ( AED leads) to interconnect between its power unit and the patient paddle or Pads according to customer,s requirement

 AED electrode pads become a mainstream,compared with Paddles,AED Pads/Gel are used to reduce transthoracic impedance when paddles are applied directly to the chest wall to deliver a shock. Better protective for patients and doctors. Especially with Mindray intellectual AED, an un-trained person can also make an emergency rescue under the guide of the defibrillators' screen and voice 


 

AED Cable has 1 or 2 17AWG-22 AWG wires can bear 5000V AC voltage and 3-8 wires for Signals transition.Round Coiled Extension cord and Flat Bulk Cable are the two main forms.

Coiled Extension cord for Defibirllator adopts TPU as Jacket. As for insulation,when extreme high voltage such as 8000V AC ,is needed,and also need the cable to be thin,then Teflon (FEP,PFA PTFE) is used.

Welcome Ask for sample or custom solution:

Other Coiled Cable for Defibrillator as following:






Your may also interested in following medical grade cables:



6 Core AED Cable



Single lead to 18 leads cable for ECG Monitoring System as following:



Coaxial Low Triboelectrical Noise Cable for micro signal devices,including ECG monitor



1P+2C/3C/4C/5C/6C/7C for Spo2 Extension Cable

First,Are They An Experienced Medical Cable Manufacturer?

Working with a experienced medical cable expert is critical if you want to keep your medical devices running safely, functionally and durable. A medical cable manufacturer must be ISO 13485 certified. This is the most direct way you can make a rough judgment how many years they have engaged in medical
cable. But this is not totally reliable, some cable manufacturers would like to apply all types of certifications when then founded the company.


An experienced medical cable factory
usually will ask you following questions when you make an inquiry if you did not give them your exact requirement:

•  What medical device will the medical cable be applied to/used for?

1. What is the acceptable OD(out diameter)and tolerance of the cable
2. What is the gauge of each wire? Or how many strands of specific conductor you would like each wire to be
3. Where is the medical device being used (i.e. X-ray room, doctor's office, Ambulance, operating room, etc.)?
4. Do you prefer disposable medical cable or reusable cable?
5. What are your sterilization methods (chemicals or physical? What are the chemical sterilization materials? What is the
   temperature, pressure, Ray (Ultraviolet, note: X-ray not used for sterilization)?  
6. Will the medical cable be exposed to any other chemicals or fluids? Will there be any extra coat to protect the cable?
7. What is the contacting level between the cable and patient (i.e. absolutely no contact, occasional contact, always
   contact, implanted, etc. This relates to biocompatibility and material choosing)?
8.   Do you have any supplementary requirements (such as, UL94 Level/framing rate, temperature resistant,ultra-flexible, Matt or Glossy, coiling etc.)?

 Second:what Are Their Producing Equipment And Laboratory Testing Devices?

  Third:Strategic Partners